Now you can strech your pallets automatically and save big on labor!

Model 6100-45-CTA Heavy Duty Turntable Conveyorized Automatic Stretch Wrap System (45 Loads/hr)

Specifications Production Speed 1-45 loads per hour NOTE: Process rates will vary with load size, number of wraps & conveyor speed Load Capacity Maximum load weight: 4,000 lbs dynamic - 12,000 lbs static Maximum load size: 50" W x 50" L (71" max. load diagonal) x 82" H (plus up to 4" top overlap) Minimum load size: 30" W x 30" L x 24" H Turntable 80" diameter skirted turntable 4,000 lbs dynamic weight capacity 29" diameter ring gear support system, direct pinion-to-gear drive 1-15 RPM rotational speed c/w soft start acceleration Final revolution deceleration and positive stop alignment 1 HP DC variable speed motor c/w turntable holding brake Remote centralized lubrication for ring gear Film Carriage Elevator 1/2 HP DC variable speed motor ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device Maintenance free 12 point carriage guidance system Film Delivery System NEW Super Rapid Thread II ™ 20" capacity pre-stretch film carriage Special Film Threading Device - Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load 1/2 HP DC variable speed motor Fully electronic dynamic dancer corner compensation 33% to 313% fixed stretch capability Pre-stretch ratio variable using easy sprocket change Carriage Descent Obstruction Safety Shut-Off Device Rapid Thread ™ Safety Door with auto power cut-off switch Superior film-to-roller contact area Lifetime warranty on pre-stretch rollers Powered Roller Conveyor Basic system: 5ft Infeed section, 80" diameter turntable section & 5ft Exit section Each section includes: Chain driven live roller conveyor rated 4,000 lbs per section 2-1/2" diameter 11 gauge rollers c/w 11/16" hex axles on 3" centers ANSI # 40 roller to roller chain drive 54" effective roller width Conveyor speeds 20 to 50 FPM (specify required speed) with electronic soft start Pass-line height - 18" from floor to top of rollers 1/2 HP AC variable speed reversible TEFC motor (turntable conveyor motor is 1/2 HP DC) Automatic load indexing and centering by photo-eye & PLC logic Electrical Input Requirement 208Y/120 Volts 3 Phase 60 Hz 30 Amps (other voltages available - consult factory) Pneumatic Requirement 3 CFM @ 80 PSI clean dry pneumatic supply required Filter/regulator c/w gauge & lock-out valve provided Typical System Dimensions 202" (L) x 143" (W) x 100" (H) (Standard dimensions are approximate) Features Control Features PANASONIC FP-X Programmable Logic Controller (PLC) HMI Touchscreen Operator Interface Panel Illuminated Power Start / Reset button Emergency Stop button Wrap Cycle Start (rewrap) button Manual controls provided for turntable jog, film carriage elevator lower/raise, film clamp open/close and conveyors forward/reverse Wrap Bypass mode selector switch Separate film carriage elevator raise & lower speed controls Film tension (force-to-load) control Separate 1 to 12 revolution top & bottom wrap control Triple beam auto load height sensing photo-eye, detects dark or shiny loads Broken film/out of film detection c/w automatic machine reset and fault beacon light Turntable drive and film carriage elevator dynamic braking NEMA 12 control panel and junction boxes Dust tight slip ring assembly Non-proprietary UL/CSA approved components Automation Features Pneumatically actuated film clamp mechanism Pneumatically actuated film tail cut/wiper arm mechanism Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle Structural Features All structural steel construction Forklift truck portable base structure design Structural steel H-beam machine tower Electro-static powder coated paint finish Safety Features Safety barriers enclose the turntable section to prevent personnel intrusion Operator Access Gate c/w Safety Interlock Switch disables machine operation when gate is opened Hard-wired emergency stop and operator access gate circuits with Category 3 dual channel safety relays

Your labor savings are huge with the Shanklin A-26

Shanklin A-26A Automatic L-Sealer Shrink Wrapper

Click to enlarge

The A-26A features adjustable height seal jaws and can automatically wrap a wide range of products, including high profile or short length items, at speeds up to 35 packages per minute. It is also available in a USDA approved model.

Features of the A-26A, A-27A, and A-28A Models

Reliable - Equipped with programmable controllers for simplicity of wiring and ease of troubleshooting; facilitates easy machine set-up and adjustment.

Flexible - Photoelectric sensor system automatically compensates for package length change; automatic film advance system allows light, flexible products to be fed through the machine with ease.

Versatile - Offers easy product and size changeover and the ability to handle virtually any type of film (depending on sealing system); most features are fully adjustable for maximum convenience.

Safe - Electrical controls are UL-listed (for meeting the highest safety standards); sealing area is protected by an electrically interlocked transparent hood through which the sealing process may be safely observed; hood may be easily lifted for full access when necessary.

Secure - Password protection capability safeguards sensitive machine functions.

Easy to Use and Maintain - EZ load unwind feature offers easy loading and threading capability; machine controls are located in front for quick and easy access.

Specifications of the A-26A, A-27A, and A-28A Models
Specification	A-26A	A-27A	A-28A
Seal Size	15"W x 21"L	21"W x 33"L	31"W x 43"L
Maximum Product Height	5 1/2"	8"	10"
Minimum Product Length	4" Standard 1 1/2" with optional closing conveyor	4" standard 2 3/4" with optional closing conveyor	7 1/2" standard 5" with optional closing conveyor
Maximum Product Length	20"	31"	41"
Maximum Film Width (Folded)	24"	30"	36"
Maximum Film Width (Flat)	44" with compact centerfolder	44" with compact centerfolder	60" with large compact centerfolder
Packaging Speeds*	Up to 35 packages per minute	Up to 35 packages per minute	25 packages per minute maximum
Longitudinal and Transverse Seal	Hot knife jaws or SmartWire	Hot knife jaws or SmartWire	Hot knife jaws
Conveyor Height	Adjustable 31 1/2" - 37 1/2"	Adjustable 31 1/2" - 37 1/2"	Adjustable 31 1/2" - 37 1/2"
Power	230V, 15 Amps, 60 Hz, 1 phase	230V, 15 Amps, 60 Hz, 1 phase	230V, 15 Amps, 60 Hz, 1 phase
Compressed Air	0.5 CFM free air at 60 PSI	0.5 CFM free air at 60 PSI	0.5 CFM free air at 60 PSI
Safety Devices	Emergency stop button instantly stops all machine functions until manually reset A transparent hood, interlocked electrically with the automatic sequencing circuit, covers the sealing area; gas cylinders support the hood when it is lifted to allow access Film clamp proximity sensors ensure safe sealing arm jaw closure Multiple safety interlocks Tamper-resistant controls Low voltage sensors and actuators
*Dependent on product and application

Options of the A-26A, A-27A, and A-28A Models By selecting just the right combination of options, you can customize your Shanklin A-Series Automatic L-Sealer for the ultimate performance, efficiency and value!
Options	A-26A	A-27A	A-28A
Adjustable Flight Bar Infeed Conveyor	X	X
Adjustable Flight Lug Infeed Conveyor	X	X
Product Separating Infeed Conveyor	X	X	X
Closing Discharge Conveyor	X	X	X
Product Pressure Rollers over the Discharge Conveyor	X	X	X
EZ Load Compact Centerfolder	X	X	X
Dual Roll Compact Centerfolder	X	X	X
Dual Infeed Eyes	X	X	X
Print Registration	X	X	X
Discharge Rollers for Light Product	X	X	X
Casters	X	X	X
SmartWire Seal Jaws (in lieu of Hot Knife Jaws)	X	X
EZ Film Thread Infeed Table	X	Standard

Automatically apply your labels and save!!!

Dispensa-Matic U-45 Label Dispenser: Is a simple heavy-duty semi-automatic electric label dispenser that is designed for labels from 3/8 of an inch to 4 and 1/2 inch widths to any length tall. This label dispenser advances at over 5″ per second Standard Speed, and 11″ per second High Speed. U-45 allows you to peel small labels with ease.
Dispensa-Matic Label Dispensers now have 2 options for sensing labels. The standard option is a photo detector that detects the label by “seeing” it from .5″ to 1.5″ away. This method works for most labels, even transparent ones. The other option is a brand new design, another Dispensa-Matic patented Original from Richard Shannon! It is an optical sensor with physical detector, allowing even the thinnest transparent labels to be sensed with ease. This sensor will operate with less than 2 grams of force (one fourth the force of the previous micro-switch), but tested to last for over 2 million labels!
SATISFACTION GARANTEED. If we cannot make you happy within 21 days, send it back. *1.
Two speed options available: High speed produces labels at 11″ per second verses Standard speed at 5″ per second
Two types of label sensing options, Photo Eye Detector, and Physical Detector
Butt cut, or die cut compatible!
Multiple row compatible.
Semi-Automatic dispenser, pick, apply, and repeat.
Label Circuit boards, PCBs, small bottles, bags, ICs, or anything that needs a small label.
Full 3 Year warranty, including parts and labor.
If repair is ever needed we offer a 1-Day turn-around!
In house manufacturing, you know you will get support when you buy Dispensa-Matic.
Dispensa-Matic U-45 is always In-Stock and ready to ship
Product Details:
We use very few outside sources for our machine components.
Side frames: made using the highest quality metals then formed, countersunk, de-burred, and inspected one at a time at our facility.
Dispensing Tables: formed out of stainless. The peel edge is hand shaped to spec by our 20+ year machinist to get that perfect peeling edge needed to dispense labels without tearing the backing paper. Dispensing tables are POLISHED with ultra-fine polishing compound so paper flows freely around the plate. (We do NOT use cheap teflon tape that will peel off over time!)
The U-45 motor: is a shaded pole AC motor, and is also made in the USA to our specifications. (No CHEAP 12v motors here!)
Dispensa-Matic U-45 is an original design: from Dispensa-Matic! American made precision, quality, support, and longevity with over 35 years of experience from the same owner/designer!
International compatibility: We use motor specifically for Europe and all other 220V 50/60hz, (no cheap 12v DC motors here)

Wrap-N-Pack Completes purchase of PES to serve you even better with Shrink Systems and service!!

 

 Now with the purchase of the professionals at Packaging Equipment Systems, we can offer you even more:

• Packaging Machinery Service Department and Parts
• Shanklin Shrink Machines from L-sealers to Automatic
  • Eastey Shrink Machines
  • High Speed Automated Labelers from Universal
  • Loveshaw Carton Erectors and Case Sealers
  • More Stretch Wrap Machine Offerings
  • More Strapping Machine options 
  • Ink Jet Box Bar Code Label Machines
  • High Speed Form Fill Auto Shrink Machinery
  Quality Vendors Include: Cousins, Packall, Dynaric, Clamco, Eastey, Poly Pack, Belco, Sigma Stretch, Universal Labeling, Shanklin, Cryovac, Sato and many more!!

Shrink your costs with Shanklin High Speed Auto L Sealers for Shrink film!

Shanklin® Semi-Automatic L-Sealer Equipment

The Shanklin^® Semi-Automatic L-Sealers are built for applications that require packaging line speeds approaching those of fully automatic sealers, but where equipment cost is a factor or where the product does not lend itself to automatic handling. All models feature automatic sealing cycle, automatic package discharge, EZ load unwind

• Simple - Easy to set up and maintain
• Rugged - Ensures years of efficiency
• Versatile - Easy to operate; easy to change over
• Innovative - Available with new SmartWire system that extends wire life and increases operator efficiency
• Semi-Automatic Operation
• Sealer Size - 15"W x 33"L
• Speed - 15 to 20 packages per minute
• Floor Space - 4.5´ x 7´ approximately
• Available with knife or wire sealing system
• Available for product flow feed from either right (S-24B) or left (S-24BL)

Shrink your costs with Cryovac CT 300 films!!!

Cryovac® CT-300 Series High Performance Shrink Film

The Cryovac^® CT-300 Series of high performance shrink films is based on the patented Sealed Air micro-layering technology platform. This distinctive shrink film has demonstrated comparable or even better performance versus significantly thicker materials. With proven versatility across a broad range of shrink equipment, these powerful shrink films provide enhanced seal strength, increased durability and retail-ready optics and clarity.

You are here

1. Product Care Solutions ›
2. Shrink Packaging ›
3. Shrink Films ›
4. Cryovac® Shrink Films ›
5. Cryovac® CT-300 Series High Performance Shrink Film

• Significant Source Reduction and Improved Carbon Footprint
• Longer Rolls Result In Fewer Changeovers, Improved Efficiencies and Lower Operational Costs
• Lower Tunnel Temperatures
• Microwavable
• Reduced Transportation and Total Logistical Costs Per Unit of Packaging,
• Genuine Value-Added Technological Innovation
• Meets the requirements for SPI recycle code “4”

Save BIG with the powerful little FOAMPLUS machine!

FOAMplus® Mini System by STOROpack

Portable foam packaging where you need it!Last updated on January 24th, 2016

FOAMplus® Mini Foam-in-Bag System is a complete stand alone workstation. It requires very little space and can be operated on a table in your Shipping Department. With the simple touch of a button, using five different preset volume settings, Operators can quickly create a variety of foam filled bags to support the packaging needs in shipping rooms, multiple pack stations, and even the production department.
Specialized application engineers of Storopack ensure that the entire work flow takes place in keeping with economic and ergonomic principles (working comfort) in order to constantly improve the customers’ protective packaging process. The Packaging Division is represented by locations in North America, Europe and Asia. The products are available through Storopack subsidiaries worldwide.
Bags available in four different sizes: Small, Medium, Large and Tube. For oversized items, a Manual mode option can be used. Lightweight, FOAMplus® Mini System can be easily transferred from one packing area to another location in your plant. No special power requirements.

FOAMplus® Mini Features and Benefits:

• Ability to protect all size and shapes of finished goods – Superior Protection
• Designed for Low to Medium User – Minimal Start-up Cost
• Predetermined volume settings – Easy to Use
• Two moving parts – Minimal Downtime
• No Chemical Drum Changeover or Disposal
• Small footprint – Flexibility of Locations
• 110v Power
• No Solvent – Improved Envirnmental Position
• Light Weight – Easily Transportable
• Service Contract optional – Transparent Cost / pack

FOAMplus® Mini System molding process

FOAMplus® Mini System makes it easy to produce your own custom packaging on-demand. The molding systems are easy to use and can produce up to 13 cushions per minute. As they are formed, the FOAMplus® Mini System cushions can simply be placed directly into the packaging carton around the product and the package is ready to go.